Shade Solenne 250
Gasket silicone for thread 123,5 mm
LED module 10W 3000KSolenne 250/155 LED 3000K
Solenne is designed by Kauppi & Kauppi and includes a total of seven lighting fixtures, all with generous matt opal glass shades and black or white glazed porcelain bases. Four of the fixtures follow our traditional range for ceiling, wall, and facade with IP44 ratings suitable for both indoor and outdoor installations. The collection also includes three more novel types of lighting fixtures, taking our pressed porcelain to new indoor contexts. Solenne includes a grand pendant with a corresponding porcelain ceiling cup, a new table luminaire with a wooden base, and Ifö Electric’s very first floor lamp.
- Article no. 8441-800-10
- E-number 7509644
- EAN / GTIN 7312908441100
- Type designation51765/LED
Specification
- MaterialPorcelain
- Base colourWhite (NCS S 1000-N)
- GlassMatt opalglas
- Glass thread (mm)123,5 mm
- Glass gasketSilicone
- Diameter (mm)250
- Height (mm)156
- Lamp holderLED
- Light sourceLED module, 10W **
- Effect10W
- Lumen, light source1000lm
- Colour temperature3000K
- MacAdam3 SDCM
- Life spanL80/B10: 47 000 h
- RaMin 90
- Lighting controlLED module, 10W **
- Rated voltage230V
- DimmableBack edge only - We recommend dimmers from ION, Schneider, Vadsbo and Niko
- IP classIP44
- Insulation classI
- Energy classF
- D classNo
- IK classIK02
- Ta-30 - +25
- InstallationCeiling/wall
- CC measurement (mm)60-66, 70
- Knock out opening4
- Cable inletBottom inlet
- Cable glandsBottom inlet
- BridgingYes
- Surface mounted cableYes
- ConnectionTerminal block
- FamilySolenne
- DesignKauppi & Kauppi
Maintenance
Disconnect the luminiarie. Remove the shade and clean it. Do not use cleaning agents containing solvents. Change the light source if necessary. Check the gasket and change it if necessary. Replace the shade.
** Only use dimmers with manual trailing edge control. Do not use leading edge dimming or automatic setting as this can shorten the lifespan of the module.
If the luminaire is modified the person responsible for the modification shall be considered manufacturer. Subject to errors in text. We reserve the right to change the technical specifications (without notice).