Opus 200/100 LED 3000K
Opus 200 LED is an elegant cylindrical formed light fitting. Its timeless design is suitable for wall or ceiling installation, both indoors and outdoors. Equipped with a LED module, 12W.
- Article no. 8265-800-10
- E-number 7501358
- EAN / GTIN 7312908265102
- Type designation8262/LED
Specification
- MaterialPorcelain
- Base colourWhite (NCS S 1000-N)
- GlassMatt opal glass
- Glass thread (mm)185,5 mm
- Glass gasketSilicone
- Weight1,94 kg
- Diameter (mm)202
- Height (mm)100
- Lamp holderLED
- Light sourceLED module, 12W **
- Effect12W
- Lumen, light source1350lm
- Lumen, luminarire853
- Colour temperature3000K
- MacAdam3 SDCM
- Life spanL80/B10: 47 000 h
- RaMin 90
- Rated voltage230V
- DimmableRC mode
- IP classIP44
- Insulation classII
- Energy classE
- D classNo
- IK classIK02
- Ta-30 - +25
- InstallationCeiling/wall
- CC measurement (mm)133, 70
- Knock out opening3
- Cable inletBottom inlet
- Cable glandsBottom inlet
- Cable area, maxMax 3 x 2,5 mm2
- BridgingYes
- Surface mounted cableYes
- ConnectionTerminal block
- FamilyOpus
- DesignDuoform
Maintenance
Disconnect the power to the luminaire. Unscrew the glass and clean it. Do not use detergents that contain solvents. Replace LED module if necessary. Check the gasket and replace it if necessary. Screw the shade back on.
** Only use dimmers with manual trailing edge control. Do not use leading edge dimming or automatic setting as this can shorten the lifespan of the module.
If the luminaire is modified the person responsible for the modification shall be considered manufacturer. Subject to errors in text. We reserve the right to change the technical specifications (without notice).