Shade globe Ø 300 mm matt opal
Gasket silicone for thread 185,5 mmClassic Globe 300 Sensor
All our sensor fixtures have white glazed ceramic bases and a movement sensor that is adapted for both indoor and outdoor use.
- Article no. 4095-506-10
- E-number 7500315
- EAN / GTIN 7312904095567
- Type designation8263
Specification
- MaterialPorcelain
- Base colourWhite (NCS S 1000-N)
- GlassMatt opal glass
- Glass thread (mm)185,5 mm
- Glass gasketSilicone
- Weight3,2 kg
- Diameter (mm)300
- Height (mm)305
- Lamp holderE27
- Light sourceMax 20W (not included)
- EffectMax 20W
- Rated voltage230V
- IP classIP44
- Insulation classI
- D classNo
- IK classIK02
- Ta-30 - +25
- InstallationCeiling/wall
- CC measurement (mm)133, 70
- Knock out opening3
- Cable inletBottom inlet
- Cable glandsBottom inlet
- Cable area, maxMax 5 x 2,5 mm2
- BridgingYes
- Surface mounted cableYes
- ConnectionTerminal block
- FamilyClassic Globe
- DesignHåkan Svennesson SD
Luminaire specific information
Sensor function: Off/On: The light fitting is turned on by movement. Daylight control: The fitting can be set to remain turn down to the luminosity desired, e.g. daylight. Hold time: How long the fitting will remain lit after movement. Technical data: The microwave movement-sensor is adapted for indoor and outdoor use. Master/slave coupling: Max 1200W resistive or 400W inductive load. Installation height: Max 6 m. Max range: 4-10 m depending on installation, can be adjusted to 10/25/50/75/100 % of the max range. Hold time: 5s/30s/60s/300s/15 min/30 min, can be adjusted. Daylight control: 2-50 lux.
Maintenance
Disconnect the power to the luminaire. Unscrew the glass and clean it. Do not use detergents that contain solvents. Replace light source if necessary. Check the gasket and replace it if necessary. Screw the shade back on.
If the luminaire is modified the person responsible for the modification shall be considered manufacturer. Subject to errors in text. We reserve the right to change the technical specifications (without notice).